Elkhart-brass Sidewinder Quick Attack Pkg 1 Install Guide Manual do Utilizador descarregar pdf

Quick Attack Pkg 1 Install Guide:

Monitor & Nozzle

MONITOR

NOZZLE

A. Tighten Sidewinder EXM monitor to

base or Quick Connect using Loctite 592

thread sealant or equivalent.

B. Add a 20A(12VDC)* fuse between

RED controller lead and positive power

lead.

NOTE: We recommend using 16 AWG for monitor power and ground. See

Sidewinder EXM monitor installation guide on page 8 of the manual for

length to gauge recommendations.

A. Position monitor discharge elbow

parallel to ground. Ensure gasket is

inside nozzle swivel.

B. Hand tighten nozzle to monitor using

swivel end piece.

C. Adjust flow by pressing down on

locking lever and rotating nozzle to

desired flow setting.

*10A(24VDC)

D. Confirm that locking lever is snapped

securely into position.

E. Loosen swivel and reposition nozzle

so the locking lever is on the very

bottom; 6 o’clock position.

F. Tighten swivel using a spanner

wrench to ensure a secure connection.

G. Connect nozzle and monitor two-way

connectors.

Confirm that all connections are tight and all electrical connections have been reconnected. If installing additional components,

such as controllers, you may choose to double check the connections after everything has been installed.

NOTE: If a Quick Connect is being installed, please refer to the Quick

Connect Install Guide. Guide can be found under the Sidewinder EXM

manual section at www.elkhartbrass.com.

90°

16g

98326010 Rev. A

1 2 3 4

Resumo do Conteúdo

Página 1 - Monitor & Nozzle

Quick Attack Pkg 1 Install Guide: Monitor & NozzleMONITORNOZZLE11.2.A. Tighten Sidewinder EXM monitor to base or Quick Connect using Loctite 592 t

Página 2 - Network

Quick Attack Pkg 1 Install Guide: Control Components & Accessories24.5.6.A. Follow mounting templates on page 30 of the instruction manual for hol

Página 3

CALIBRATE HORIZONTALENTER SETUP MODEEXIT SETUP MODESET MONITOR SPEEDSET KEEP-OUT ZONESSET VER TRAVEL LIMIT SET HOR TRAVEL LIMITCALIBRATE VALVESET STO

Página 4 - JOYSTICK

Quick Attack Pkg 1 Install Guide: Button Press Logic4BUTTON LOGICJOYSTICKButton Press Logic: Joystick Joystick Layout:UpDownRightLeftAUXOSCNozzle Patt

Comentários a estes Manuais

Sem comentários

Elkhart-brass Sidewinder Quick Attack Pkg 1 Install Guide Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Equipamento Elkhart-brass Sidewinder Quick Attack Pkg 1 Install Guide. Elkhart Brass Sidewinder Quick Attack Pkg 1 Install Guide User Manual Manual do Utilizador

Resumo do Conteúdo

Comentários a estes Manuais

Manuais e produtos relacionados com Equipamento Elkhart-brass Sidewinder Quick Attack Pkg 1 Install Guide